Description
Specifications
Manufacturer Location:varies by item
Color/Finish:brass
Material:zinc alloy/steel
Type:latchbolt
Additional:Instructions
:
CAUTION: Do not unscrew small retaining screws at rear of cylinder. Use only dry lubricant (graphite) on lock. Keep keyway clear of foreign objects.
Select convenient height for lock and place template against edge of door.
Mark hole positions. Bore 1-3/8" hole for cylinder where indicated. Note: Bore through door until tip of drill barely emerges from other side. Remove drill bit and complete hole by drilling from opposite side to reduce splintering.
Drill 3/32" diameter holes 1/2" deep for attachment screws.
Insert cylinder and trim ring from outside of door. Attach back plate with two connecting bolts. Note: If bolts are too long, saw or break at groove, using caution to avoid marring the thread.
Cut or break connecting bar so it projects 3/8" to 1/2" beyond the inside of the door.
Place lock on door so connecting bar enters “X” slot in back of lock. Secure with large mounting screws.
Align strike carefully, using template as a guide. Draw outline of strike on door jamb trim and chisel wood away (mortise) so strike mates freely with locking bars.
Mark mounting holes for strike, drill pilot holes, and secure strike to door jamb with screws provided.
understands the importance of supplementing primary entrance door locks by providing an array of high quality products for all levels of protection. The single cylinder interlocking deadbolt features:
5-pin tumbler with hardened steel pins, Weiser Keyway.
Door thickness: 1-3/8" to 2-1/4".
Single cylinder locking unit and strike.
Locks door to jamb to prevent forced entry.
1-1/4” hole required.
Includes tamper-resistant shutter guard.
Reviews
There are no reviews yet.